Router Forums banner
1 - 1 of 16 Posts

· Premium Member
508 Posts
Ed I tried the dust Collection with my Bosch when i first got it and after using it on one project it was relished to the case that is in the way. :)

If I had to do all of my routing indoors I would hook up a swing arm or slidding hanger above my table for the hose and cord on light weight Springs so i would have easy movement of the router. I would also use a large downdraft table the size of my work bench with 3 sides about 2 foot high to keep the dust from leaving the table. But since I am limited to shop space the outdoors, Open work area on or around my work bench will have to do.
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.