Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3,165 Posts
Discussion Starter · #1 ·
Finally got my DC all ducted using 4" PVC and flex hose.. I connected everything together using bare/stranded grounding wire wound on the outside (a couple wraps per pipe) of all the pipes.. Is this enough, or should I also run wire through the inside?
I've noticed that how it is has already relieved the pipes of static electricity..

Wife says it looks like a sewer in the garage.. I call it a habitrail..
 

·
Registered
Joined
·
276 Posts
Dust collector grounding

AxlMyk said:
Finally got my DC all ducted using 4" PVC and flex hose.. I connected everything together using bare/stranded grounding wire wound on the outside (a couple wraps per pipe) of all the pipes.. Is this enough, or should I also run wire through the inside?
I've noticed that how it is has already relieved the pipes of static electricity..

Wife says it looks like a sewer in the garage.. I call it a habitrail..
Mike I bought a small collector and I ran the wire inside and outside like the instructions said on the back of the grounding wire package I bought at Woodcraft. Check the images below.

Gary
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top