Router Forums banner


910 Views 4 Replies 5 Participants Last post by  mgmine
Hi I've just renewed the bearings on my Router and all went well getting the wires back into place was a bit of a job! Feeling pleased with myself I plugged it in and nothing !! Not so pleased now! short of hitting it with a hammer, I know all the spade terminals are in the right place as I took loads of pictures and checked all the usual suspects. Does anybody have any sensible suggestions please.
1 - 1 of 5 Posts
Welcome to the forum, Pappion...
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.