Router Forums banner
1 - 1 of 7 Posts

· Registered
638 Posts
Hi All!
I am hoping to get some guidance on drawings. I use Galaad to make my intial drawings for items that are usually smaller in size such as 12x45 mm. I am unable to extrude my drawings using Galaad and would like advice on which program would be possible and how to change the settings in order to open the drawings. I am not proficient with CAD, so i apologize ahead of time for what would be a very simple solution.

Usually the problem of not being able to extrude a drawing is because the drawing has some corners that are "open" (not joined together) or sometimes because some lines overlap.
Check all the corners and make them "coincident" and connected!
Then you should be able to extrude.
1 - 1 of 7 Posts