Router Forums banner
1 - 1 of 1 Posts

·
Premium Member
Retired since June 2000
Joined
·
15,065 Posts
There was a very good reason why John sold the patents to the Eliminator chuck, it used a cam against the bit whereas the MUSCLECHUCK grips almost 360° giving about four times the grip of a conventional chuck, it also gives about an extra half inch depth of cut plus of course it only requires half turn of a ball ended Allen key to lock/unlock. All three of my half inch Makita routers have MUSCLECHUCKS.
 

Attachments

  • Like
Reactions: Roy Drake
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top