Router Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I have a contractors saw with a composite table on the right side. I have installed a Rockler aluminum router insert and my Bosch 1617EVS is mounted nicely. I need to make or buy a fence with T tracks and dust collection. Any suggestions?
 

·
Registered
Joined
·
15 Posts
One of my favorite router books, "Router Magic" by Bill Hylton has a clamp-on fence for his Bench-Top Router Table on page 203. It doesn't have a dust port on it as designed, butt should be easy to modify one into it.
 

·
Retired Moderator
Joined
·
16,385 Posts
I have a contractors saw with a composite table on the right side. I have installed a Rockler aluminum router insert and my Bosch 1617EVS is mounted nicely. I need to make or buy a fence with T tracks and dust collection. Any suggestions?
I whipped together a fence with dust collection this summer. I closed in the area over and behind the bit and used a forstner bit to drilla hole for my shop vac hose. It collects 90+% of all the dust and chips and cost nothing to make. There is a view from each side.
 
1 - 4 of 4 Posts
Top