Router Forums banner
1 - 20 of 25 Posts

· Registered
Joined
·
1,986 Posts
Discussion Starter · #1 ·
Final stages.
Once I had the measurements from my "sketch-down" drawing I started the construction stage for the new angular sink vanity.
In this project I made several raised panels using the tricks I´ve seen here and other sources.
A knob is pending for the cabinet door.

I am becoming a master at angular cabinets.:cool::cool::cool:
 

Attachments

· Super Moderator
John
Joined
·
6,975 Posts
very nice job Alexis
 

· Registered
Joined
·
31,266 Posts
1st rate Alexis..
 

· Registered
Mike
Joined
·
3,960 Posts
Alexis a great project and photos to show us how it's done.
 

· Registered
Joined
·
1,986 Posts
Discussion Starter · #19 ·
Hello, dear fellows.
@reuelt. We had it but our town city is a hot place so we decided to delete it due to the high electrical power consumption. @Paul. You are right but I just had that hinges as surplus material from others projects. Maybe in a near future I´ll change them. @tom. In that place there was a shower and the BOSS decided to eliminate it to make a bigger one by reducing the master room bath. You have a very acute vision.

Thank to you all for the kind comments.
 

· Registered
Joined
·
22,910 Posts
Hello, dear fellows.@tom. In that place there was a shower and the BOSS decided to eliminate it to make a bigger one by reducing the master room bath. You have a very acute vision.
Although I live in the desert, the occasional rain will quickly flood low areas, so I always notice drainage issues.
 
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top