Router Forums banner

Fixtures cut on the CNC

1231 Views 3 Replies 2 Participants Last post by  MT Stringer
Here's a little different slant on CNC projects and one of the main reasons behind my decision to build one - fixtures, jigs, and templates. Initially it was for building acoustic guitars but since I have branched off into doing some contract work the precise fixtures have really come in handy. I have posted a few of them on my YouTube channel and these two in particular were in a video posted 2/9/17. That video deals more with how and why they were made but since they have been in use for 10 months or so I thought I'd do another quick video showing them being used in a light production mode. The consistency of parts and fixtures really shine when you're doing multiples of pieces.

So here's the quickie video from today's run of B-52 tails -

David
  • Like
Reactions: 5
1 - 4 of 4 Posts
Two thumbs up, buddy.

Attachments

See less See more
  • Like
Reactions: 1
Thanks, Mike! Are you back up and running yet?

David
Thanks, Mike! Are you back up and running yet?

David
Not yet but the PC has been repaired and shipped. Due Friday.
  • Like
Reactions: 1
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top