Router Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
394 Posts
Discussion Starter · #1 ·
Another bandsaw box made from Ash.

The 'wave' that the dolphin is riding was added in order to level out the box drawer -- gives more to look at also. The smaller dolphin drawer pull was cut out on the Scroll Saw, all other cuts were done with the bandsaw.
 

·
Registered
Joined
·
394 Posts
Discussion Starter · #5 ·
Tampa-Steve said:
I really like that box you made.
I have never tried my hand at a bandsaw box.
Is that a pattern of your own or did you get it somewhere?
Beautiful work!
Bandsaw boxes are fairly easy, just time consuming. :) A friend came up with the dolphin outline, I tried one of his but didn't like the way it 'sat' as the drawer was way off from being horizontal -- pretty much no way to cut drawer cavities that would hold anything.... So, I added a 'wave' under the front of the dolphin to raise the main part of the body to near horizontal, seems to work better that way.

Thanks for looking.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top