Router Forums banner
1 - 2 of 11 Posts

· Banned
12,004 Posts
Have you considered using a key hole bit to rout slots in the back side of the furring strips? I would use 6 holes for this size frame to ensure good support, 2 on each side and the bottom. There are many good types of wall anchors that will accept screws. Yes, this costs a bit more than the nails but it will look far superior.
1 - 2 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.