[-Sam-]

Hi everyone,

I want to "picture frame" a bathroom mirror that is 30"x35" in size with 1x2 furring strips that I will rout a decorative edge to. My question is, which nails are best to use to hang up the frame? I was thinking of using 4d nails which I already have on hand. I will definitely pre-drill the nail holes first before installing them, that way the frame won't crack on me. Thanks!

Boricua

 

[-Sam-]

reible,

Yes nails! What's wrong with nails? Okay, okay, you're probably thinking use a nail gun and/or a little construction adhesive right? Hmmm...

 

[-Sam-]

Have you considered using a key hole bit to rout slots in the back side of the furring strips? I would use 6 holes for this size frame to ensure good support, 2 on each side and the bottom. There are many good types of wall anchors that will accept screws. Yes, this costs a bit more than the nails but it will look far superior.

Yeah, I like the idea a lot but I would really have to think about how it would work out because the way I was planning to build it was to make a rabbet on the frame so it can cover the edges of the mirror and I don't know if I would have space for the slots unless I use a wider board. Hmmm... let me think about this.... Like I said I really like the idea! I do have a keyhole cutting bit and the template for making it. Thanks Mike for the idea! Also thank you reible! It does make a lot of sense. I really don't want to make a mess if I decide to take it down. Once again, thanks for the great ideas! Keep up the great work on your replies! Okay, let me go and start thinking... Hmmm....

 

[-Sam-]

Wow, that's a pretty good idea too reible, thanks!