Router Forums banner

Glad to be a new member!

1440 Views 7 Replies 8 Participants Last post by  Kevin
I have seen you use a router bit to make longer tennons on the show. I have never been able to find a source for these bits. Could you post a source?
Also I would be interested in a source for the material you use for your fences on the show. Thanks for your help.
1 - 8 of 8 Posts

W e l c o m e . . A b o a r d !!

You will get the answers to all of your questions...
... just keep asking...
Hi jtyree

Are you talking about this one ▼
Tenon Cutter

"the material you use for your fences on the show"
You can find it on eBay and many web sites.
If you do a search on the forum you will see many URL's for a source . :)

Bj :)
Welcome to the forums jtyree. If you go to the web site Bj has listed. You will notice on the left side of the page a yellow section that has a list of items. Click on fences. It will show you what they use on the Router Workshop.
Welcome to the Router Forums!

Welcome to the community! :D
Your glad to be a new member and were glad to have you! I hope you enjoy yourself here :)

Welcome to the forums.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.