[Stick486]

looking real good so far...

are you looking to do something like this...

.

 

[Stick486]

or this...

.

 

[Stick486]

I think the first set that Stick shows would do the trick.

Sent from my Pixel XL using Tapatalk

when you set your glass in your frame make sure you use space balls or short pieces of screen spline to cushion the glass..

 

[Stick486]

lets look at the other side of the coin....

your choice of construction is going to capture the glass and if the glass were to get broken you either have to break the frame or recut the frame so the new glass drops back into the frame from the back...
you could leave say the outside stile loose (screwed into place and not glued to facilitate glass replacement...

or you could cut your frame to accept the glass in real world fashion but cutting a stepped rabbet......
and you can sill any seen profile you wish...
see the images...

.