Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
2,045 Posts
I have also also met and talked with Alex. Really nice guy and knows his stuff. I had seen and downloaded the Bandsaw Clinic video just after getting my Laguna 14-12 and learned far more from that then the manual. The manual was good for assembling and safety info but use wise was different. Laguna says to have the blade centered on the wheel while Alex demonstrates aligning the gullet of the blade on the center. If you think and try this you'll see the reasoning. Since then I've always aligned with the gullet on the center of the tire and I have 0 run out. I can prove it with my calipers. I also made sure my fence was square to the blade that was square to the table. To be clear you square the table to the blade and the fence to the blade........and I use this resaw blade
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top