Router Forums banner
1 - 1 of 17 Posts

· Registered
Joined
·
3,046 Posts
By "collars", I was referring to the (usually) brass rings that fit onto a guide bushing to increase the offset by a given amount. One common example is the typical "inlay kit":



I've found this "oversized" set to be handy, too:

Woodworker.com: FIVE PIECE BRASS INLAY BUSHING SET
I've been trying to figure out the part number for this "Template guides (1/2", 7/8", 1-1/4", 1-5/8", 2-3/8" OD) ". I also can't figure out what the ID of those are.:(
 
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top