Router Forums banner
1 - 1 of 13 Posts

· Marine Engineer
4,963 Posts
I had a set of bushings I picked up at a woodworking show, and they too were just a hair longer than a 1/4 of an inch. A quick touch on the belt sander and they were perfect! (just make sure you remove any sharp burrs afterwords) I now use a lee-valley set for the larger baseplate hole than the porter cable guides and they work perfectly and are cheap!
1 - 1 of 13 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.