Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
888 Posts
Discussion Starter · #1 ·
I recently purchased a set of Harbor Freight PC style guide bushings for about $12. Prior to making the purchase I checked out some other sets and the prices varied quite a bit. Is there that big a difference in quality? The HF bushings worked fine. What would more $ have gotten me?
 

·
Retired Moderator
Joined
·
16,385 Posts
The only real issue I can see is if they are not concentric which you could check with a caliper by measuring in 2 axes to see if they are the same. It wouldn't matter if the barrel is off center with the rim as you have to center them when you install them anyway.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top