You have to really look at the tools before you buy them. In the one here in California, there are a lot of off-brand power tools. I bought their 14" bandsaw. I've found that the instructions weren't very clear because the manual appeared to come from a different version of the saw than the one I purchased. However I was able to pull the correct manual up off the Internet with a search engine. I don't know if I will save any money because it will probably need a lot of aftermarket upgrades (guide blocks, power switch, motor, stand/feet) to make it equal to some of the name brand ones I've used.

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month