Router Forums banner

HDPE Fence Material

3325 Views 13 Replies 4 Participants Last post by  Bob N
I have a slab 1 inch thick by 30 inches long of white hdpe (same as used on RW). Will sell or trade. Will cut to 1 1/2 in. or 2 in. strips or one piece 12 inches wide.
1 - 14 of 14 Posts
Ten bucks for 1 1/2 in strip; $12 for 2 in. Probably about 4 dollars for parcel post.
Probably not enough to get involved in making a trade unless you want the whole 12 inches.
I would trade for a set of brass router guides.
tscott said:
I have a slab 1 inch thick by 30 inches long of white hdpe (same as used on RW). Will sell or trade. Will cut to 1 1/2 in. or 2 in. strips or one piece 12 inches wide.
Are the "strips" 30 inches long or 12 inches long?
steveo
Actually, the strips will be 30 inches long by whichever width you prefer.
Maybe a picture will make this clearer. At least, I'll try to attach one

Attachments

See less See more
Do you still have this?
Yes, I can still cut off about 5 pieces 2 inches wide by 30 inches long or 7 pieces 1 1/2 inches wide by 30 inches long

Tom
What kind of $$ are we talking? (US Currency)
US Dollars: $10 for 1 1/2 in strip; $12 for 2 in. Plus $4 dollars for parcel post in US
US Dollars: $10 for 1 1/2 in strip; $12 for 2 in. Plus $4 dollars for parcel post in US
US Dollars: $10 for 1 1/2 in strip; $12 for 2 in. Plus $4 dollars for parcel post in US

Did I just double post????
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top