[tomp913]

@Bob Adams

Do you clamp the track to the part being cut, or do you find that the strips on the bottom of the track keep it from slipping while you're cutting?

I use the EZSmart version which has stops in the Y-direction so you can cut the dado in two passes without moving anything other than the carriage between the stops - but I do clamp the track so it doesn't move.

 

[tomp913]

Tom do you have the Srk ? I 'd like to buy but can't justify the $200 dollar price for srk. do you use it a lot. I have eureaka track.

Gary,

Yes I have the SSRK, and use it primarily for cutting dadoes in cabinet parts. As shown in the videos made by EZ, it's pretty versatile although I really haven't used it for much else. Used in combination with the MFT top and Parf Dogs, you can quickly cut accurately sized dadoes - put a stop on the table and you can cut multiples very easily. I have the EZ saw. don't use it much since I bought a Makita track saw but do use the UEG for breaking down sheets of plywood before cutting finished parts.