Router Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
22,224 Posts
You came to the right place. Welcome.

I've attached a pdf of the 18 plus things that accelerated my learning curve. It covers about 15 years of trial and error and help from other folks here. I have a lot of tools because I bought them during my peak earning years, but you can do a lot with just a few key tools, the Table Saw being number one. But all that's in the pdf. It's long but has pictures. Hopefully it will help you avoid some of the costly mistakes I made as I started up. Like you, I've done carpentry projects since I was about 12. This is a really great hobby.
 

Attachments

·
Super Moderator
John
Joined
·
6,973 Posts
Hello and welcome to the router forum
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #8 ·
Thank you everyone. DesertRatTom I downloaded the list and will read thru. Sreilly, I plan on making simple things at first like cabinet doors, then working toward bedroom night stand, or similar, eventual I want to create all types of furniture.
 

·
Registered
Joined
·
22,224 Posts
Thank you everyone. DesertRatTom I downloaded the list and will read thru. Sreilly, I plan on making simple things at first like cabinet doors, then working toward bedroom night stand, or similar, eventual I want to create all types of furniture.
Furniture can be challenging. Good idea to start with cabinets. Doors can get tricky, depending on their design. Have fun learning.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top