Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello everyone,
I found this forum and I found some threads that I am looking at with interest.
About myself, I have a background in engineering and I am building an 12m boat ( at the planning stage).

I will start straight asking with the first piece of advice :p
Some time ago I looked up on the internet a particular CNC machine. It was particular as it used as the X-axis the edges of the very plate it was cutting ( a very basic Rhino model-by-memory is attached here below). So it could basically cut infinite length panels.
It would be really useful to me as I am now vacuum infusing a series of 12 metre long PVC panels and I need to CNC cut them after the lamination in order to get the full size components)

Can anyone remember of point me out to the model?
Cheers!

399289
399288
 

·
Official Greeter
Ross
Joined
·
10,026 Posts
Welcome to the forum.
 

·
Official Greeter
Joined
·
19,110 Posts
G'day @Steff_no Welcome to the forum
A 12m boat is a big project. Keep us up to date on progress.
 

·
Registered
Mike
Joined
·
3,836 Posts
The design of the CNC looks like it would be prone to racking.
 
1 - 4 of 4 Posts
Top