Router Forums banner

Hello new to this forum

1331 Views 10 Replies 9 Participants Last post by  jw2170
Leigh d1258r-24 jig
1 - 11 of 11 Posts
Hi W and welcome but I'm not sure what your message is.
Leigh d1258r-24 jig
Hi Leigh. I'm Harbor Freight table saw.
Leigh d1258r-24 jig
Hello and Welcome, Leighd1258r. I'm John the bandsaw bndsw 301.
Welcome to the forum.
Welcome. Was there a question you had about this great jig?
Sorry all I’m just getting know how to use this yes my question is I just bought the Leigh d1258 r 24 I believe it’s 25 years old and I wanted to know if it can be upgraded to quick release levers and anything else thanks
welcome N/A ....

the most through answers you can get are from Leigh...
their CS/TS is stellar outstanding...

TEL./FAX Customer Service and Technical Support (CS/TS)
800-663-8932 (Canada/USA)
604 464-2700 (Tel.)
604 464-7404 (Fax)

EMAIL - Customer Service:
[email protected]

Technical Support: (jig owners only)
[email protected]

HOURS:
Mon-Fri 8:00AM - 4:30PM PST

CLOSED - Canadian Holidays
New Year's January 1
Family Day February 18
Good Friday April 19
Victoria Day May 20
Canada Day July 1
BC Day August 5
Labour Day September 2
Thanksgiving October 14
Remembrance Day November 11
Christmas Holiday December 25-26

ADDRESS:
Leigh Industries Ltd.
P.O. Box 357
Port Coquitlam, BC
Canada V3C 4K6

Location:
Leigh Industries Ltd.
1615 Industrial Ave.
Port Coquitlam, BC
Canada V3C 6M9
See less See more
  • Like
Reactions: 3
  • Like
Reactions: 1
G'day, and welcome to the forum.
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top