Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Recently got a Dewalt DW616PK plunge/fixed combo - have wanted one for a while. I probably will make a router table first, i think I've seen enough basic plans online that I can pick one and try it. Won't cost too much to try.

After that, I would like to create a drawer for a workbench I made from scrap 2x lumber, and am considering making some interior storm windows, which is something I've wanted to do for about a year now. Having a router to make rabbets for the glazing and making joints in the frame corners will work well, I think, and I am planning on learning the router well enough through smaller projects to eventually make these windows look good enough that my wife will let me put them up.

Don
 

·
Registered
Joined
·
589 Posts
donb the router is the most versitile tool you will ever buy and the most fun.
You can buy most any bit to do almost any job you would like to dive in to most of all be safe and enjoy let us know how your projects go
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top