[Herb Stoops]

If you have a shaft that takes a 1/2" bit then the 1/2" to 1/4" reducer should fit as long as you have the nut to tighten up the bit.
https://www.amazon.com/2Pcs-Router-...e/dp/B07SQYX1YF/ref=psdc_552574_t3_B00IG6YGBE

https://www.amazon.com/Whiteside-di...o/dp/B0012JG9QM/ref=psdc_552574_t1_B00IG6YGBE

https://www.amazon.com/dp/B01KJHTCS...9Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Herb