Router Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello... Does anyone have any idea where I can find information about or purchase a router base that will hold my router at a 45 to cove an INSIDE corner? Thanks!!
 

·
Marine Engineer
Doug
Joined
·
4,905 Posts
I don't know if this is what you're looking for, but try Woodhaven's Angle ease
http://www.woodhaven.com/detail.aspx?ID=1252

"ANGLE-EASE™ - PATENT #6,742,558 - Owners Manual

DO MORE THAN YOU EVER IMAGINED BY TILTING YOUR ROUTER

Just imagine what you could do if you could tilt your router in the table. A roundover bit set at 45º makes a beaded edge, a core box bit makes drawer pulls and vertical panel bits cut beautiful moldings. Straight bits work for chamfering and stave construction. Slot cutters can groove the staves for a spline. All is right with the world! " or so they say!


Hope this helps
 

·
Registered
Joined
·
11,921 Posts
Doug, that is a neat design. But ouch on the price!
Aquarium builder, perhaps there is another way to get your cut than tilting the router? Can you describe what you are doing with dimensions? I am thinking of ball shaped optical cutters. They use these to shape lenses for eyeglasses. By making multiple passes you can cut about any curve you could want. I can dig up a picture if this would help.
 

·
Registered
Joined
·
1,702 Posts
Are you doing a molding that you would normal use a coping saw to do a back cut for? If so I have never seen that done with a router especial if compound angles are involved. I could see a quarter round being cut that way in a corner but anything more than that would be a lot more effort to do then just doing it with a coping saw.

If someone does have a router method I'm very interested as well. I have a couple of rooms I'm redoing and hey I'm not to old to learn a new trick or two.....

Ed
 

·
Registered
Joined
·
1,702 Posts
aniceone2hold said:
Doug, that is a neat design. But ouch on the price!
Aquarium builder, perhaps there is another way to get your cut than tilting the router? Can you describe what you are doing with dimensions? I am thinking of ball shaped optical cutters. They use these to shape lenses for eyeglasses. By making multiple passes you can cut about any curve you could want. I can dig up a picture if this would help.
I have seen a couple of your posts with the lens cutters mentioned how about a new thread and pictures, and maybe details on how us normal people might find these.

Ed
 

·
Registered
Joined
·
1,702 Posts
bmb in ab said:
Reible ... Try The Coper it is available at Windsor plywood.

I saw a demo of it and it looks pretty slick.
WOW!

slick is right!

At least the baseboard molding is covered.......

Thanks for the url!

Ed
 
1 - 7 of 7 Posts
Top