[roofner]

This is a sturdy but simple book case but very nice look. Here is the video .

Still needs kick at the bottom and plugs at the top for pocket holes and a back.

 

[roofner]

Paul not a stain it's Infinity interior latex wall paint Dark brown. Definitely sturdier than cheap press wood furniture for about same price. I put the plugs in the pocket holes
painted the kick for the bottom. Added a reinforcing board for under top shelf. Need to sand plugs and touch up . Install the back. Screwed up cut the back to wrong size . I knew the shelf length was 37.5 inches. I forgot to add 2 inches for the the side pieces. I'm going to build some shelves for my wife and I will make the shelf width 36
and the handy panels width will add 1.5 inches .

 

[roofner]

Alexis your right this isn't my shop but I volunteer at a Nursing home and build projects with residents. There is a man there that likes woodworking and we have build projects. I cut the parts at home and assemble them there this is activity center. That resident is getting this bookcase for his room. I have thread on here with projects we have built. I'll have to take a picture of my small shop. Most of the work takes place in my carport. However they let me do work in that room in winter months paint and assembly.

 

[roofner]

Here is a Picture of completed book case.

 

[roofner]

By the way I solved my problem of cutting the panel for the back wrong width. The panel was still the 8 ft I just cut the panel to the 39.5 inches. Turned the panel the other way the short part is in the back just like like a press wood cheap bookcase the luwan panel grain still looks ok.