Router Forums banner

Hey

1249 Views 15 Replies 13 Participants Last post by  jw2170
I am new to this forum and I join this forum to learn about woodworking.

Thanks
  • Like
Reactions: 2
1 - 16 of 16 Posts
Hello N/A and welcome to the forums...

About your desire to learn... We can help as we have put together some light reading for you...
As in, we've put some helpful information together at this here link to help you get up and running in the world of routers... We hope it's very useful to you... Enjoy...
Do take some time and read the safety PDF's... PLEASE!!!
Blood and trips to the ER, we find, are very annoying... Not to mention – expensive...

We welcome all questions on about any subject you can come up w/ too....
Not only that, we are very good at spending your money...
  • Like
Reactions: 4
Welcome...you've come to the right place...you won't find a more knowledgeable or friendly folks anywhere...on any subject !
  • Like
Reactions: 1
Welcome to the forum N/a
  • Like
Reactions: 1
Welcome aboard. A little information such as name and where you're from helps in answering questions. Not all locations have the same brands available.
  • Like
Reactions: 3
Welcome aboard. You came to the right place. Feel free to check out any of my projects. Being a photographer in my past life, I try to add lots of pics to my project posts.

Hopefully, you will get some inspiration. As well as a lot of the other members that contribute also.
so, read on! :)
  • Like
Reactions: 3
Hey, Mecky; welcome! As has been mentioned above, a bit about yourself, name and where you live...Canada, US, S. Africa for example...is really helpful to the members if you have questions.
For example, our N. American table saws accept dado sets, UK ones don't (EU as well?).
  • Like
Reactions: 1
I’m thinking maybe some of these new members are on the witness protection program

Hey, Mecky; welcome! As has been mentioned above, a bit about yourself, name and where you live...Canada, US, S. Africa for example...is really helpful to the members if you have questions.
For example, our N. American table saws accept dado sets, UK ones don't (EU as well?).
  • Like
Reactions: 3
Glad you decided to join the fun. People here like halping people learn more about woodworking. You can ask questions, but it will speed up your learning curve to try making some project, and if you get stopped, take a picture and ask. There are often several ways to deal with any problem or issue, and you'll probably get a variety of responses, all of which will help you learn more.
I’m thinking maybe some of these new members are on the witness protection program
Good one, Rick. Points for you. lol.
  • Like
Reactions: 1
Welcome to the forum.
@meckyzzz Don't let the odd comments put you off, some of the boys get out of line now and again.
  • Like
Reactions: 1
Thanks to everyone... If I have any question, I will ask for sure! I found the forum members are very active and helpful.
Welcome to the forum..
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top