Router Forums banner

Hi, my name is Bruce.

1323 Views 6 Replies 7 Participants Last post by  neville9999
My name is Bruce and this is my first post. I have been a follower of the Router Workshop for many years and have made many projects using the tools and techniques the I found out about during that time. What prompted me to start posting is I have recently mounted my Hitachi M12 router in a Kreg router table. I have also installed a lifter. What I am in need of is a bent collet chuck wrench. I would appreciate it if someone could point me in the right direction to finding one or, if someone has one for sale that would be great. Thanks and I am glad to be aboard.
1 - 7 of 7 Posts
Welcome to the community Bruce...

Do you know the size you need? 16mm & 23MM?

Woodcraft carries a few that might work....

WoodRiver Router Collet Offset Wrench

as does Peachtree

Off the top of my head, I believe that the 3/4 will work in place of the 23mm
See less See more
Hello Bruce welcome to the forum

Mike's tools has them also
Welcome to the forum, Bruce.
Welcome to the forum Bruce.
You could always bend on yourself as you would not be the first on to do that. NGM
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.