Router Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
2,045 Posts
Welcome aboard.I found that after I built the router table I seldom use the router by hand unless there is no way otherwise. I should have done that so much sooner then I did. There are a ton of plans out there to use and I ended up with a version by Crestonwood. I built the cabinet and bought the fence and lift. Between the table saw and the router table, they are the center of the shop for me.
 

·
Official Greeter
Joined
·
20,101 Posts
G'day Don. Welcome to the forum.
You will find the router table a 'must go' appliance after a while....
 

·
Super Moderator
John
Joined
·
6,973 Posts
Welcome to the forum
 

·
Registered
Joined
·
22,219 Posts
NIce to have you aboard. I can tell you now that most of old guys have grandkids to make stuff for, so I, for one, would really love to see pictures of some of your projects and toys. You can post from your computer by clicking the funny little rectangle below where you post.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top