Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
2,045 Posts
Welcome aboard.I found that after I built the router table I seldom use the router by hand unless there is no way otherwise. I should have done that so much sooner then I did. There are a ton of plans out there to use and I ended up with a version by Crestonwood. I built the cabinet and bought the fence and lift. Between the table saw and the router table, they are the center of the shop for me.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top