Router Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
4 Posts
You could try this idea,make a template from 1/4" plywood, make the cut out big enough to allow for the router base and use a plung bit,Attach with double sided tape or small screws that would be covered by your grill if you plan on using one.I use double sided carpet tape works well.Hope this helps the Restorer
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top