Router Forums banner
1 - 18 of 18 Posts

·
Super Moderator
John
Joined
·
6,973 Posts
Hello and welcome to router forum
 

·
Retired Moderator
Joined
·
16,385 Posts
Hello and welcome. You've come to the right place. You'll never find a more helpful and friendly bunch than here.
 

·
Registered
Oliver (Prof. Henry)
Joined
·
2,252 Posts
I think you may live in a town with one of the greatest names ever! Welcome.
 
  • Like
Reactions: kp91

·
Registered
Joined
·
15,459 Posts
Ha! You beat me to it George...
Hey, B.C; welcome!
You've probably already noticed that you can't post stuff from the 'net (until you reach 10 comments) but you can definitely post pics etc from your own hard drive. It's an anti-spam thing. Seems to work; very little irrelevant stuff shows up here.
Anything (pretty much) goes in the LOBBY forum. :)
 

·
Registered
Joined
·
112 Posts
Discussion Starter · #15 ·
my setup

Didn’t really know what sub forum to post my setup so I will just list it here in the intro section. I have been here on this forum for just a little while and have already learned so much. Here is my setup…

In the Router Wall cabinet I have my workhorse DeWalt DW621 and bits. I also have my trusty Craftsman to loan to a neighbor or take with me to my sons’ house or parents’ house 3 hours away.

Bench Dog 40-102 ProMax cast iron router table extension mounted in my JET table saw.

A Triton MOF001C 2-1/4-HP router mounted to the router table with a Rockler aluminum pro plate C.
.
Workbench Toolroom Machine Tool Machine tool


Tool Table saw Table saws Cutting tool Saw


Vehicle Tool
 

·
Registered
Joined
·
112 Posts
Discussion Starter · #18 ·
Randy , did you make the router wall cabinet? I sure like that setup
Yes - I built it. I got the plans from either Shopnotes or some other publication - bothers me that I can't find the plans. Here are some screen grabs of the cabinet I got off the web. I do think they are currently being offered by Rockwell or somebody.
Shelf Furniture Room Shelving Cabinetry


Plan Furniture Technical drawing Parallel
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top