Router Forums banner

I’m trying to find info on this because I’m looking to sell it.

2356 Views 14 Replies 9 Participants Last post by  iains2007
1 - 2 of 15 Posts
Without the little corner pieces, it would probably come in handy for making router table holes. My mom had kitchen cabinets with veneered particle board doors. They had a routed design like in the pic. The design was painted black and kinda tinted along its edges. They looked quite nice considering the material used. I wonder if that rig was for something like that.
Rectangle Transparency
See less See more
  • Like
Reactions: 1
It seems to me that the bigger curves are just to allow for the baseplate of the router to get by. A bushing or bearing would ride on the interior of the adjustable rectangle but the baseplate would ride on the bars. The little corner inserts could make a shape like the drawing I posted. The thumbscrews in the large curves are the locks.
1 - 2 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.