Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22,020 Posts
Hi Gary, HD carries a pine board about 1x4 that is a bit oversized. By very careful selection, I have been able to find some pretty straight boards with minimal knots. When I've really been lucky, I fine pieces with long clear spaces between knots. I've been able to make a few nice frames with this clear stock, just not too large. To get out of big box wood, you must pop for a jointer and planer.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top