Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
Picked up a Sjobergs Bench today & it came with a couple of add ons. Firstly there is a steel vice adapter plate which locks into the wooden vice, simple but effective. Secondly & here lies the problem, it came with a Sjobergs branded Holdfast which I hope the photos demonstrate appears to be a standalone item. I'm hoping this might work in conjunction with the bench (somehow!). The Holdfast itself will not fit the square slots already in the Bench & I can't figure out any way in which this separate unit works in conjunction with any part of the Bench as it is currently conformed. Any help much appreciated.
P.S. I can't find anything like this from Sjobergs on Google , even an image, very strange!
 

Attachments

·
Registered
Joined
·
35 Posts
Discussion Starter · #4 ·
Very many thanks guys. I checked out the links but the Holdfasts though employing flat bar seem to be going into round holes! (Square Peg!) Nothing on the legs of my bench to attach either the board or the Holdfast either (bit too flimsy anyway to be honest). Basically, I'm not understanding why the fixed riveted head of the holdfast is running parallel to the slotted board. It appears that it will only clamp to itself! Really cracking up with this one (bah)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top