Router Forums banner
1 - 1 of 11 Posts

· Registered
205 Posts
My suggestion as well. In fact you can call and speak to Mark at 1.888.804.6272.

That said while I don't have the Incra lift I do as Herb and have DC at both the fence and lift areas that do an outstanding job. That said I should mention that I have a CV1800 6" DC system and the 6" port feeds a single inlet with 2 - 4" blast gates, one for the fence and the other for the lift compartment. DC makes all the difference.
That is the same table and fence I have, sweet mod on running another extrusion for separating the micro adjuster. Love the stand, that is nicer than the furniture in my meager existence. Tip o' the hat to you, good sir.

I have similar D/C setup as yours, along with a table top dust hood as well. Hoping to start using it soon, once the D/C is connected and everything else is built. The clear router cabinet has 2 blast gates in it to control air flow.


1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.