Router Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
i would like to try inlay work using template guides with down-cutting spiral cutters. i have a set of brass template guides and several size carbide cutters. what are the combinations of cutters and guides to use for inlay work using shop made acrylic templates?
 

·
Registered
Joined
·
23,786 Posts
Hi

This link below will show you what size you will need to use and what bit..

Inlay Sets - Lee Valley Tools

======

i would like to try inlay work using template guides with down-cutting spiral cutters. i have a set of brass template guides and several size carbide cutters. what are the combinations of cutters and guides to use for inlay work using shop made acrylic templates?
 

Attachments

·
Registered
Joined
·
10,671 Posts
Greetings Dick and welcome to the router forum. We are pleased to have you join us.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top