Router Forums banner
1 - 1 of 12 Posts

· Registered
23,784 Posts
Hi Andy

PLEASE post a picture of the circle cutting jig, and like you I have made many and have got one or two from Rockler I'm now making a new type also that will be easy to make and it will be accurate.
Most need to be screwed to the base ( a big pain) of the router this will not need to be,this one just needs a brass guide installed in the router base and it can use a 1/4" to 3/4" router bits and with one pin you're cutting the hole out.

Looking forward to seeing yours :)

Bj :)
1 - 1 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.