Router Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
Yeah, It takes a long time to complete sure enough.It has to be turned in three stages and let it cure about six months between stages.Most people use a router and a jig to do it .Thanks
 

· Registered
Joined
·
4 Posts
Discussion Starter · #9 ·
I'm using a 12"wood lathe to turn it with, but it requires increments of .001-.005 inches on the wraps and rings. That is where I'm having a problem building a jig. Thanks for your info.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top