Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10,671 Posts
Greetings Kathy and welcome to the router forum. Thank you for joining us, and remember to have fun, build well and above all be safe.

I am not sure what too dry means or is, but then there i more that I don't know then I do know. 3" thick and 20' long says to me that you will first need to get cut to a manageable length and then re-sawn to 5/4 (1 1/4" thick) then you can think about working with it. Depending upon where you live, you might find a small wood mill that could help you get that done.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top