Kitwn
1 - 10 of 10 Posts
Welcome to the forum Kit . Looking forward to seeing your cnc 
Joined
·
22,926 Posts
Welcome. We have a lot of Aussies here.
Joined
·
29 Posts
Thanks for the welcome gents.
Rick,
Looks like I can't upload a link until my tenth post so you might have to wait for a view of the current machine in action, though if you add the obvious bits to the following you might get a glimpse. vimeo.com/210020811
The Z axis has been beefed up since this was made and I'm currently drawing up the plans in CamBam for making the X and Y axes much more rigid.
Kit
Rick,
Looks like I can't upload a link until my tenth post so you might have to wait for a view of the current machine in action, though if you add the obvious bits to the following you might get a glimpse. vimeo.com/210020811
The Z axis has been beefed up since this was made and I'm currently drawing up the plans in CamBam for making the X and Y axes much more rigid.
Kit
Joined
·
16,386 Posts
Welcome Kit.
Joined
·
658 Posts
Welcome to the forum !
Gary
Gary
1 - 10 of 10 Posts
