Router Forums banner
1 - 1 of 6 Posts

· Registered
23,784 Posts
Hi mikehop

Yes it's VS is very important almost all the bits you will use in the trim router will be small , and it's easy to cook them quick if you run them at 25,000 to 30,000 rpm's..

I do recommend the Bosch Colt in the KIT format... :) with the offset base that comes with the kit and the 45 deg.base that comes in the kit also..Plus the add on base so you can use the PC brass guides with the Colt.

I made a plunge base for the one I have and that comes in handy..
I also made a router cabinet to hold the Colt so I could use it in the router table format.

Great Router....


I am looking at the Bosch laminate trimmers and the VS models are about $25 more. I haven't purchased a laminate trimer before and would like to know if VS is important for this size router. Any recommendations?
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.