Router Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Calling all Legacy Ornamental Mill owners. Need advice. Want to share what I know. Have a 1200. Sad to know can't get any more parts or accessories. Put retractable casters from Rockler on my unit. Fit perfectly. Lets communicate. Steve.
 

·
Retired Moderator
Joined
·
16,385 Posts
Hi Steve and welcome. We've had numerous Legacy owners as members over the years. I'm just not sure if any are currently active. Are there specific issues you want to discuss?
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #4 ·
Doug , Want to do fluting on flat surface, face frame for a China cabinet. Have you done this and if so what jigs or accessories do I need to accomplish this on my LagacyMill? I have extra beams, the extruded aluminum, if need to construct something to hold the flat stock. Steve.
 

·
Marine Engineer
Doug
Joined
·
4,960 Posts
All you need is a to make an MDF table that sits on top of the bed. All you have to do is make sure the stock is put in the same place for each piece, which means fence and stop on one end to register off of, just use scrap MDF screwed down.

You will use the stops on the X axis to set the length. You will use the Y axis to space your flutes, Z axis for depth.

There a few tips in this video that might help. I don't know if the old sales DVD from 'way back' is available on line, it had a lot of good tips and pointers. There are a couple more here hosted by Magnate.net, the source for ornamental milling bits http://www.magnate.net/Articles.asp?ID=252

 

·
Registered
Joined
·
3 Posts
Need help.
i have just received my Legacy 1000 Ornamental Mill. It took 3 years to ship it to Russia.
And one gear was missing. It was one of those "2X Gear Multiplier" and the gear with a lot of holes in a circle formation is missing.

So my only idea is to create that part myself.
Could you measure your gear and give me the dimensions\blueprint?
 

Attachments

·
Marine Engineer
Doug
Joined
·
4,960 Posts
Need help.
i have just received my Legacy 1000 Ornamental Mill. It took 3 years to ship it to Russia.
And one gear was missing. It was one of those "2X Gear Multiplier" and the gear with a lot of holes in a circle formation is missing.

So my only idea is to create that part myself.
Could you measure your gear and give me the dimensions\blueprint?

you might want to try this fellow Custom Gears- Legacy Ornamental Mills - The gear is actually 2 gears, one about 10 inches in diameter, one about 2.5 inches in diameter.
 

Attachments

·
Registered
Joined
·
31,264 Posts
Andy Anderson from Legacy may still be able to provide parts. 1-800 279 4570
this may complicate things but the owner is in Russa...
 

·
Registered
Joined
·
3 Posts
this may complicate things but the owner is in Russa...
If there is an option to contact that supplier trough some sort of email, i would be really glad to make a request for that part.
There is a service - storage located in US, that storage receives packages and then redirect them to Russia itself.

So it won't be inconvenient for supplier to ship it.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top