Router Forums banner

LNC Atc cnc post processor for vectrics aspire

1037 Views 4 Replies 4 Participants Last post by  DesertRatTom
I need help on using the ATC function on this CNC but I need a post processor for vectrics aspire. Help wanted
1 - 5 of 5 Posts
I got a post processor from the company I am buying a machine from StyleCNC. Mine has an LNC controller as well, so perhaps the post processor will be the same. Send me a message and I'll try to send them to you and maybe you can help me in 2 months when my machine arrives and I get to the point where I have no idea of what I am doing....
Welcome to the forum @CleanAirWoodworks
Welcome. The CNC mavens don't check in daily so be a little patient.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.