Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
I’m looking for walnut boards preferably. Preferably 1/8” thick, but i suppose 1/4” would do fine. I need at least 9” wide, and at least 18” long. Longer is okay.

As a last resort, i could likely use a veneer if it’s on the thicker side.

Any suggestions? I’m open to suggestions to other types of wood if it can be gotten in the size i want. It simply has to contrast nicely with cedar.

Normally i use Rockler, Bell Forest, Woodcraft, or The Wood & Shop. Can’t find this size boards on either of those.



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
83 Posts
Discussion Starter · #8 ·
Thank you all for the help. Looking stone of the suggested sites now. And ive also found my preferences at Ocooch hardwoods. I prefer 1/8” for my projects.

Thanks again!


Sent from my iPhone using Tapatalk
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top