Router Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
195 Posts
I have a M12V. Look arount at flea market or pawn shop and pick up a 21mm and a 24 mm open end wrench(s). A friend of mine took the 24mm to work and "thinned" it out on a mill. Of course I always take my router out and on top of the table to change bits the same way Bob and Rick did on the series when they used their M12V's.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top