Router Forums banner

M12V Second Wrench

3K views 5 replies 6 participants last post by  Pop_pop1 
#1 ·
Where can you find a second wrench for the Hitachi M12V router?
The one-wrench-spindlelock is a knuckle buster.
 
#3 ·
Gary,
I assume you are using the M12V in a router table? If so, Sommerfelds tools for wood seels a bent wrench for use with the m12V. It allows you to change bits from above the table without removing the router from the table.

I use mine in a Sommerfeld table with the wrench and can't live with out it. Their website is www.sommerfeldtools.com. I don't work for them, just have some of their products which I do like very much.

I hope this helps.

Clay
 
#4 ·
I have a M12V. Look arount at flea market or pawn shop and pick up a 21mm and a 24 mm open end wrench(s). A friend of mine took the 24mm to work and "thinned" it out on a mill. Of course I always take my router out and on top of the table to change bits the same way Bob and Rick did on the series when they used their M12V's.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top