what model router???
got a picture of what you gaffed...

 

The two springie thingies are probably the brushes...take the caps out, take out the brushes, remember their orientation and slap it back together...they'll be out of the way when you reassemble...then put the brushes back in and put the caps back on...

Welcome to the forum...

 

Welcome to the forum . Sorry I can't help , but your in good hands here as Stick is one of the residence experts on Bosch.
A first name and some info in your profile is always nice for getting to know you better

 

Welcome to the forum,sorry to hear you are having problems disassembling the router, nothing is simple anymore.

If it is the brushes, I think Nick called it right.

Was the switch acting up,or did you just want to do periodic maintenance?

Herb

 

Stick's the Bosch man...he will steer you in the right direction...

 

I think it's the brushes too but I rather be shure..

 

Welcome to the forum Seaside. I also think Nick nailed it but more info would be good. Router model is important and a picture or two wouldn't hurt. You can upload pictures into your post as long as they are in your computers hard drive. To do that you click on Go Advanced - then find Manage Attachments - then Browse to find the file - Open it - wait a few seconds for it to show in your Browse list - then Upload. Once it has uploaded you can Close Window and post your reply.

 

Welcome to the forum Seaside.

 

I set it aside for a bit. I wil try and make a pic -- but it appears as above said, If I can pullout the brushes and set the motor back in and replace it willl be good.

the brushes seem to have a spring attached - not sure how to deal with that. I'll get back to it tomoro

 

I got it all back working again.

Thank you all for comments, help and welcomes.

Merry Christmas to all.

 

Very good to hear. Glad people here were able to point you in the right direction.

Merry Christmas to you and your family as well.

 

Merry Christmas...

 

Merry Christmas to you Seaside...