Router Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
23,786 Posts
Cabdor

Just a quick note***

They do made Flute Cutters for the router table ,with a fence like the one below you can cut flutes all day long and they will come out true,you can cut 3 flutes at one time or just one at a time,then just move the spacer up or down and they will come just the way you want them to.

Fence Below ▼
http://www.routerforums.com/attachment.php?attachmentid=2638

Flute Cutters
2 wing carbide tipped with 5/16" bore.
Buy as individual cutters or as complete assembly with arbor and bearing.
Cut flutes on the edges of curved pieces.
Stack different cutters to create a stepped flute for a decorative edge or molding, or stack multiple cutters to create miniature fluted moldings for clock cases, small bookcases or cabinets.
The 1/4" arbor has 1" length and the 1/2" arbor has 1-7/16" length for cutters, spacers and bearings.

http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html
Snapshot below
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/graphics4/flutecut.jpg
Plus this one
http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_mflut.html

You can also make your own long router Arbor and stack 6 flute cuters and cut them all at one time.
see snapshot below ▼
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top